Vauxhall Meriva B Error message code 84 | HELLA (2024)

Vauxhall

Meriva B

Model year: 2011

Engine: A17DT / A17DTC / A17DTS

Air intake temperature too high /

Error message code 84 /

Reduced engine power

On the vehicles listed above, the following message may appear in the DIC (Driver Information Center):

Code 84 (reduced engine power).

Thermal problems may cause the aforementioned error message in the DIC. The engine power is throttled.

Vehicles with the following vehicle identification number are affected:

W0LSH9EF6B4000002 - W0LSH9EF7B4408718

Possible cause:

Cooling of the intercooler is impaired due to incorrect radiator grille covers. The airstream from driving cannot cool the intercooler sufficiently.

Remedy:

To remedy this, the radiator grille covers (drawing, item 1) should be unclipped from outside through the opening in the lower radiator grille and removed.

Vauxhall Meriva B Error message code 84 | HELLA (2024)

FAQs

Vauxhall Meriva B Error message code 84 | HELLA? ›

Code 84 (reduced engine power). Thermal problems may cause the aforementioned error message in the DIC. The engine power is throttled.

What is error code 84? ›

Document Information. Status Code 84 will occur when the system's device driver returns an I / O error while netbackup is writing to either removable media or a disk file.

What is code 84 reduced engine power? ›

Dear customer, the error description of Opel or Vauxhall code 84 means that "engine power has been reduced". In other words, due to a problem experienced in the vehicle, by reducing the fuel going to the engine, the vehicle master has reduced the engine power, thus reducing the performance of the vehicle.

What is code 84 on Vauxhall Corsa? ›

Code 84 - reduced engine power.

What causes code 84? ›

It seems like code 84 is indicating that your car has entered limp mode, which restricts its performance. To determine the exact cause, I recommend getting a code scan done to identify any trouble codes stored in the system. The good news is that many parts stores offer this service for free.

How do I fix error code e84? ›

Right-click on Steam's shortcut icon and select Properties. Go to the Shortcut tab in the Steam Properties window. To modify the Target field, click at its end, add a space, and type "-noreactlogin." Click Apply and then hit OK.

Can I still drive my car with reduced engine power? ›

Don't Ignore Reduced Engine Power

If you experience a reduced engine power issue, continued driving can worsen the problem and cause more damage. It is highly recommended to take your vehicle to a service center for diagnostics as soon as possible.

How do I get my car to stop saying engine power reduced? ›

Shut off the engine, wait 10 seconds, then restart the vehicle to see if this resets the reduced engine power light—but this will only work if it's a signal error. Avoid driving your vehicle when the reduced engine power light is on—instead, identify and repair the underlying problem that's causing the warning light.

How do I get my car out of reduced engine power? ›

Low engine oil, loose cables, and a clogged catalytic converter commonly cause reduced engine power. Tighten loose cables or clean your oxygen and mass air flow sensors to bypass reduced engine power. Replace your battery or catalytic converter if they are damaged to override reduced engine power.

How do I fix code 84 on a Vauxhall Meriva? ›

Cooling of the intercooler is impaired due to incorrect radiator grille covers. The airstream from driving cannot cool the intercooler sufficiently. Remedy: To remedy this, the radiator grille covers (drawing, item 1) should be unclipped from outside through the opening in the lower radiator grille and removed.

What is code 82 on Vauxhall Meriva? ›

So it's either a service reminder or low oil "change engine oil soon" warning.

What is code 84 in Chevrolet Cruze? ›

loss of engine power mainly due to low boost pressure. hose.

Do car error codes clear themselves? ›

The car's internal computer only resets after a set period where it checks all of its sensors once more. The reset can happen automatically after around 10 to 20 cycles. A cycle is a phase where you turn on the car and turn it off again. For other vehicles, you'll have to drive around 50 to 100 miles before it resets.

Do engine fault codes clear themselves? ›

Will a check engine code clear itself? For the most part, no it will not for most reasons. Only if you have a faulty gas cap, or something minor will it clear itself.

How do I fix steam error code? ›

The specific reason for the error will be shown in the parenthesis at the end of the error message.
  1. Basic Steam Troubleshooting. ...
  2. Restart Computer. ...
  3. Clear Download Cache. ...
  4. Repair Library Folder. ...
  5. Verify Local Files. ...
  6. Change Download Region. ...
  7. Reinstall Steam. ...
  8. Move Game Folder.

How do I fix Windows error code? ›

Table of contents
  1. Restart your PC.
  2. Use the System File Checker (SFC) and CHKDSK system utilities.
  3. Install the latest Windows 10 Updates on your PC.
  4. Uninstall incompatible Windows 10 updates, apps, or drivers.
  5. Perform a System Restore.
Feb 6, 2023

What is error code 84 in DeviceNet scanner? ›

84 Module is initializing the DeviceNet network. None. This code clears itself once module attempts to initialize all slave devices on the network. 85 Data size was incorrect for this device at runtime.

Top Articles
Latest Posts
Article information

Author: Aron Pacocha

Last Updated:

Views: 5787

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Aron Pacocha

Birthday: 1999-08-12

Address: 3808 Moen Corner, Gorczanyport, FL 67364-2074

Phone: +393457723392

Job: Retail Consultant

Hobby: Jewelry making, Cooking, Gaming, Reading, Juggling, Cabaret, Origami

Introduction: My name is Aron Pacocha, I am a happy, tasty, innocent, proud, talented, courageous, magnificent person who loves writing and wants to share my knowledge and understanding with you.