One of the most important things on a tractor dashboard is the Tractor dashboard symbols and meanings. It’s there to communicate important information to the driver, so it needs to be easy to understand. In this post, we will explore the various tractor dashboard symbols and their meanings. From warning lights to fuel levels, you’ll know everything you need to know about these essential symbols. Check it out now!
Contents
🌈Colors of Tractor Dashboard Symbols
🚜Tractor Dashboard Warning Lights and Symbols
🛤️Most Common Tractor Dashboard Symbols and Their Meanings
🌾What does this light on my John Deere tractor mean?
🚜What lights should be on a tractor?
💡What are the three lights on top of a tractor called?
🌟What are the 2 outer lights on top of the tractor called?
🔆What are the 5 lights on top of a truck called?
🌈Colors of Tractor Dashboard Symbols
The tractor dashboard warning lights and symbols may vary depending on the tractor make and model, but generally they indicate a problem with the equipment. Colors of the tractor instrumentpanel warning lights;
A red warning light indicates a potential danger to personnel or equipment, such as a chemical leak or stalled engine. A blinking red caution light means that the tractor is being operated in an unsafe manner and should be stopped immediately.
A yellow warning light indicates a potential problem that requires careful driving. A flashing yellow warning light means that the tractor is operating at the maximum safe speed for the current conditions.
A green warning light indicates that the tractor is operating normally and does not require attention.
See also: Massey Ferguson dashboard symbols and meanings
🚜Tractor Dashboard Warning Lights and Symbols
1
Fuel Level Gauge
This tells you how much fuel is in your tank.
2
Left Turn Indicator
When the lever is switched to the left side, a flash should come on.
3
Tachometer
Signifies engine speed in revolutions per minute.
4
Right Turn Indicator
Flashes when you switch the turn signal to the right.
5
Engine Coolant Temperature Gauge
This graphic indicates the engine coolant temperature. The red area on this indicator means that the engine is overheating and needs immediate attention to prevent serious damage. If you see this warning, shut off the engine immediately and have it diagnosed by an authorized John Deere dealership (if necessary).
6
Service Alert Indicator
The FSA has a turbine monitor that monitors the wind speed, airflow and other parameters to allow the users to adjust accordingly. If there is an issue, it will illuminate so the user can identify (review message in information display). If not resolved at home, you should take your John Deere vehicle to a John Deere certified dealer for evaluation.
7
Hydraulic Oil Temperature
The information display will alert you when the hydraulic oil overheats (review the error message for more details). If necessary, have a John Deere dealer diagnose your vehicle.
8
Electrohydraulic Hitch Indicator
Errors in the hitch display will be illuminated if they occur. If things don’t seem right, consult with a John Deere dealer who will diagnose the vehicle.
9
Neutral Indicator
If you see the Transmission Information indicator is on and flashing, this indicates there is a problem with your transmission. If you are looking for guidance on what to do next, consult your Owner’s manual for instructions. If the lights stay lit up and you need help, have your John Deere dealer check it out.
10
High Exhaust Temperature Indicator
The presence of the temperature allows for an active filter cleaning.
11
Exhaust Filter Indicator
Notifies you when the exhaust filter needs to be cleaned, soot levels are getting out of hand.
12
Exhaust Filter Disabled Indicator
Warns you when the exhaust cleaner filter has been disabled.
13
Engine Air Cleaner Restriction Indicator
This light will turn on when air cleaner element is clogged. If it’s necessary, take to John Deere dealer for diagnosis.
14
Engine Information Indicator
Let’s keep our eyes open for any engine malfunctions. When the check oil alert appears, you’ll know it’s time to refil the oil and review error messages in the information display. If necessary, take your vehicle to your John Deere dealer for a diagnosis.
15
Transmission Information Indicator
The dash lights will come on when you’re having transmission trouble (review the error message in the info display). If necessary, have your John Deere dealer diagnose your vehicle.
16
Information Display
Here is an example of the information that you can pull from your on-board diagnostics monitor.
17
Trailer 2 Indicator
These lights flash when your trailer’s turn signal or hazard lights are on.
18
Charging System Indicator
The light will turn on to say the alternator is malfunctioning. If this is the case, you should take your vehicle to John Deere for diagnosis.
19
MFWD Engaged Indicator
Indicator lights up when the vehicle is in front-wheel drive.
20
PTO Engaged Indicator
This light will come on when your car is in reverse gear.
21
High Beam Indicator
Illuminates when the headlights are switched on
22
Differential Lock Indicator
The headlights will illuminate when the differential lock is engaged.
23
Park Brake Indicator
The park brake light will turn on when the brake is engaged.
24
Vehicle Indicator
The blinks briefly and turns off when the turn-signal or hazard warning lights to the right of the steering wheel are switched on.
25
Trailer 1 Indicator
Comes with a built-in warning system when turn signals or hazard lights are turned on.
26
STOP Indicator
The light turns on to indicate when a critical fault has occurred. Power off the engine immediately, and contact John Deere for diagnosis.
27
Vehicle Information Display
Displays the vehicle’s Hi/ Lo (If equipped). When in diagnostic mode, displays name of controller that is experiencing fault.
28
PTO Icon
The PTO speed illuminates when the person selects it.
29
Hour Meter Icon
The great thing about small businesses is that you can get high-quality without spending a lot of money. You pay for what you need, and that’s it. No wasted money or time spent on things you don’t need.
30
Vehicle Information Display
On this tractor, you’ll be able to monitor the wheel speed, engine hours, and pto operating speed. And you can verify PTO operation using diagnostic codes.
Some tractor dashboard symbols have specific meanings that are known by almost every driver. For example, the “O” symbol on the oil pressure gauge means “low,” and the “H” symbol on the water level indicator means “high.” Other symbols may have less universal meanings but are still understood by many drivers. An example of this is the warning triangle that is often used to indicate a hazard ahead.
See also: Mahindra Tractor dashboard symbols and meanings
There are a variety of tractor dashboard symbols that can be used to communicate different messages to drivers. Some of the most common symbols include: speedometer, fuel gauge, oil pressure, water level, and temperature.
🛤️Most Common Tractor Dashboard Symbols and Their Meanings
On tractor dashboards, you’ll usually see symbols or abbreviations for different things. Here’s a primer on the most common ones:
Tractor Dashboard Symbol:Battery
Meaning: This symbol indicates that the tractor’s battery is charging.
Tractor Dashboard Symbol:Oil Pressure
Meaning: This symbol indicates the oil pressure in the tractor’s engine. If the oil pressure is too low, it can cause engine damage.
Tractor Dashboard Symbol:Coolant Temperature
Meaning: This symbol indicates the coolant temperature in the tractor’s engine. If the coolant temperature gets too high, it can cause engine damage.
Tractor Dashboard Symbol:Fuel Level
Meaning: This symbol indicates how much fuel is in the tractor’s tank. When this gauge gets low, it means that you will need to refuel soon.
The Tractor dashboard symbols and meanings can be a little daunting at first, but with a little bit of understanding, you’ll be able to use them to your advantage on the road. This article will outline each symbol and its meaning so that you can start to understand how they work together and start to use them in order to improve your driving experience. Get started learning about tractor dashboard symbols today!
See more: Kubota Dashboard Warning Lights and Symbols
🌾What does this light on my John Deere tractor mean?
To troubleshoot your warning indicators, remember that the yellow “CAUTION” light flashes when indicator lights 7, 8, 12, 13 or 14 come on. If the red “STOP” light flashes and an engine malfunction is detected, turn off the engine immediately. See also: john deere tractor dashboard symbols and meanings
🚜What lights should be on a tractor?
In most cases, equipment used in the agricultural industry must come with side lights, rear lights, stop lights and indicators. Additionally, the number plate needs to be illuminated so that it can be read at night.
💡What are the three lights on top of a tractor called?
These are lights located at the top-rear of the trailer. They are located around the center of the vehicle. These markers are used to alert drivers that the vehicle is wider than 80 inches and will signal a danger if it cannot stay in its lane.
🌟What are the 2 outer lights on top of the tractor called?
Clearance marker lights are the two outermost fixtures on a cab, which are used to identify the outer edges of the vehicle’s body. These fixtures must be mounted as high and wide as possible, at the reasonable discretion of the vehicle manufacturer.
🔆What are the 5 lights on top of a truck called?
Semi truck headlights are required to have a minimum of five amber lights on top. These lights help notify other drivers about the height of an approaching vehicle.
In general, a red dash light indicates a warning and something that requires you attention, an orange / amber light suggests an advisory issue that you should be aware of but not necessarily take immediate action and a white / blue / green light is most often simply for information / confirming an action / function.
The check engine light is usually the most serious and feared warning because of the kind of damage it can signal. This warning often indicates the potential for serious engine damage. When ignored, your vehicle could suffer from a blown head gasket or a seized engine.
Whether it's an improperly closed door, or the dreaded check-engine alert, dashboard warning lights are how your car communicates with you when something goes wrong. They light every time you start your vehicle, illuminated briefly as your car or truck warms up and makes sure all systems are safe and ready to go.
When the gas pump symbol is illuminated on your dashboard, it is notifying you that your fuel tank is almost out of gas or diesel. It can also potentially light up when your gas cap is loose or open.
While many drivers would consider the two most important gauges on the vehicle the speedometer and fuel gauge, each vehicle is equipped with other gauges that provide useful information on the vehicle's condition while on the road.
The check engine light — more formally known as the malfunction indicator lamp (MIL) — is a signal from the car's engine computer that something is wrong. The light could be a minor issue, such as a faulty gas cap, or it could mean something more serious, such as a misfiring engine.
This warning light usually indicates a problem with your car's automatic transmission. It might turn on because the transmission fluid temperature is higher than normal – or it could serve as a reminder that your transmission fluid levels are getting low and need to be topped up.
An engine management light, or EML (sometimes also called the 'check engine light') is a dashboard warning light that illuminates when an issue with your car's engine, exhaust or emissions system has cropped up.
Two types of lights may light up your dashboard: warning or indicator lights. Warning lights are serious and should be taken care of right away. Indicator lights let you know that something needs to be serviced or repaired soon, so drive carefully.
Hazard warning lights are orange/amber in colour, like the warning lights of maintenance vehicles. This keeps conformity with the lighting rules allowed on vehicles where red and blue denotes an emergency vehicle, and so on.
If you see the letters ESP with a circle around it or a car with skid marks behind, this is to alert the drive to a problem with the electrical system.
The orange check oil light is the general reminder for your vehicle which is most commonly referred to as an oil change indicator light because it's a basic reminder for you to change the oil on your vehicle.
Check your gas cap first. Many vehicles have a loose gas cap indicator that will be triggered before your check engine light comes on. If your gas cap is loose or the seal is not tight, the vapor leakage can cause your fuel system to trigger the check engine light.
When your parking brake is activated, your brake light will also be on. In many cases, the light looks like a red or yellow circle with the letter "P" or an exclamation mark "!" in the middle.
Bad Fuel Pump, Fuel Pressure Sensor Can Trigger 'Check Engine' Light, P0087 Code. Your car's “Check Engine” or “Service Engine Soon” light can flash on for more than 1,400 different reasons.
In most new and used models, the “Low Fuel” light signal is either designated by flashing text or a symbol of a gas pump. There are sensors in your tank that let your electronics know when you're running out of gas, and the light will start flashing when you're down to either a gallon or 1.5 gallons of fuel left.
Oil gauges look like most indicators on your dashboard. There's a label (typically “OIL”), numbers (ranging between 1-80 or 1-100), and a dial with an indicator needle. Instead of numbers, some vehicles use "L" and "H" to indicate high or low pressure.
The unit of measurement is either PSI or Bar. The ideal oil pressure varies depending on the car brand and model, but generally, the ideal oil pressure is between 25-65 PSI.
Your temperature gauge is found in your 'car's instrument cluster. You should be able to pick out the gauge from its defining symbols – a thermometer and the letters “H” and “C” for hot and cold. You may see the gauge fluctuate a little, depending on the day.
The engine's Malfunction Indicator Light (MIL) is illuminated on a dashboard. A small, yellow engine-shaped light indicates that the car's electronic system has detected a problem that needs to be checked. This warning light is known as the Malfunction Indicator Light (MIL).
This light looks like a genie lamp with a drop coming out of the end, but in some models it is a red light that says OIL. Any red warning light that your vehicle displays is an indication that your vehicle needs maintenance as soon as possible to avoid serious damage.
The check engine light is one of your car's dashboard symbols – it's an orange engine-shaped icon set amongst your dashboard lights that illuminates to alert you on your car's health.
The 2-em dash—two consecutive em dashes—indicates missing or disguised letters or words. It is sometimes called the omission dash or the double em dash.
Generally, this indicator light means a problem has been detected in the automatic transmission (not applicable in manual transmission cars) or transaxle. This light can also indicate an Electric Shift Control system warning.
The most common codes are the powertrain (“P”) codes. This group of codes includes engine, transmission and emission systems. For example, a P300 code is called a random misfire code. It means that one or all the cylinders aren't contributing as much power as the others.
If you notice any difficulty shifting gears or you hear a screeching or whining noise, this could be an indication that your powertrain transmission is in need of repairs. Check the transmission fluid – If your transmission fluid is low or dirty, then you may experience issues with the powertrain.
A loose gas cap is one of the most common reasons for the check engine light to go on. Check that your gas cap is screwed on securely and that it's in good condition. If you have a tank of bad gas in the car, your check engine light may come on.
In some cars, a yellow check engine light means there is a problem that needs to be investigated and a red or flashing light means there is a serious problem and you need to stop right away. Your gauges will help you to determine problems like overheating and low oil pressure.
Red dashboard lights are serious warning lights. You should stop immediately, or risk damage to the car (or worse, yourself). If you are out driving when you see a red warning light, pull over and deal with the problem. If it requires attention from a professional, don't drive down the block to get one.
This light looks like a genie lamp with a drop coming out of the end, but in some models it is a red light that says OIL. Any red warning light that your vehicle displays is an indication that your vehicle needs maintenance as soon as possible to avoid serious damage.
When this red or yellow transmission warning symbol is illuminated, your car is alerting you that your transmission is overheating. If this warning light turns on, you should immediately stop your vehicle and turn it off when it's safe to do so.
Automatic Emergency Braking (AEB) System- This light resembles two cars crashing head-on with each other. This light will briefly illuminate when the car starts, and tells you when the AEB system is set to OFF on the vehicle information display.
A check engine light notifies the driver that something isn't functioning the way it should. Known technically as the malfunction indicator lamp (MIL), this warning light in your instrument cluster is in the shape of a car engine. The light can be orange, red, or yellow, depending on your vehicle.
Hazard warning lights are generally used in the event of a breakdown. If you feel your car starting to lose power whilst driving, put your hazards on to warn other drivers that you may be about to slow down or stop suddenly.
The Master Warning light is used to notify you of a potential problem with one or more of your vehicle's advanced systems. It will be accompanied by a message in your car's vehicle information display with a more detailed system message.
The oil can symbol means the oil pressure is low. If the symbol has a wavy line below it, that means the oil level is low. When this is the case, topping off the oil should make the indicator light turn off.
One of the most important dashboard warning lights to pay attention to is the red oil pressure light. The low oil pressure light looks like a genie lamp or old-fashioned oil can (some dashboards display the word “OIL” instead of the icon).
An amber engine oil level light means you should stop the car as soon as it's safe. Roadside assistance: 0800 777 192. Is the lamp lit continously or is it flashing? Lit continously: Top up the engine oil as soon as possible (refer to the owners manual for instructions or contact an authorised repairer)
Exclamation Point in a Circle: Brake Warning Lights
The bright red circle with an exclamation mark inside indicates an issue with your brake system. This could be a routine warning or a sensor detecting depleted brake pads or low brake fluid.
What does the wrench light mean? Both of these symbols indicate that your car needs service. Usually, it's because of some sort of time-based milestone not being met, or there's a fault with the car that needs professional attention.
Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
![Tractor Dashboard Symbols And Meanings [Complete Guide] (1)](https://i0.wp.com/dashboardwarning.com/wp-content/uploads/2022/10/Colors-of-Tractor-Dashboard-Symbols.jpg "Tractor Dashboard Symbols And Meanings [Complete Guide] (1)")
![Tractor Dashboard Symbols And Meanings [Complete Guide] (2)](https://i0.wp.com/dashboardwarning.com/wp-content/uploads/2022/10/Tractor-Dashboard-Warning-Lights-and-Symbols.jpg "Tractor Dashboard Symbols And Meanings [Complete Guide] (2)")
![Tractor Dashboard Symbols And Meanings [Complete Guide] (3)](https://i0.wp.com/dashboardwarning.com/wp-content/uploads/2022/10/Most-Common-Tractor-Dashboard-Symbols-and-Their-Meanings.jpg "Tractor Dashboard Symbols And Meanings [Complete Guide] (3)")
![Tractor Dashboard Symbols And Meanings [Complete Guide] (2024)](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAEAAAABCAQAAAC1HAwCAAAAC0lEQVR42mP8/h8AAvMB+NzmkbcAAAAASUVORK5CYII=)