How to Talk to ATC: 6 Tips for Brand New Pilots - Thrust Flight (2024)

Learning how to talk to ATC can be intimidating…

…but these 6 tips will guide you in your journey to mastering ATC communication.

Communicating effectively with Air Traffic Control (ATC) is a vital skill for all pilots. But mastering this aspect of aviation communication can seem daunting due to the precise nature of the language.

This article offers 6 practical tips to help pilots of all levels improve their interactions with ATC, aiming to build confidence, improve understanding, and create clearer communication.

After you read this guide, be sure to review these common ATC communication examples and phrases every pilot needs to know.

How To Talk to ATC

1. Make Sure You Are On The Correct Frequency

This may seem silly but this is one of the most basic mistakes every pilot makes at least once in their life.

You want to be transmitting and listening on the correct frequency at all times. It can be helpful to write down all applicable frequencies and have them readily available for your flight.

It’s going to make you much less stressed, and can save you from an embarrassing transmission as well.

Be sure to have extra pens or pencils on standby in yourflight bag.

2. Plan Out What You Will Say When Transmitting to ATC

Be concise when talking, and think before you talk! Follow this formula when thinking out what you will say so that you’re always concise:

  • Who you are talking to
  • Who you are
  • Where you are
  • What you want

“Addison ground (who you are talking to), Thrust 980TF (who you are), holding short of Alpha over Romeo (Where you are), ready to taxi to active with information tango. (What you want)

How to Talk to ATC: 6 Tips for Brand New Pilots - Thrust Flight (1)

3. Anticipate What ATC Will Say

After flying a few times, it becomes a little more predictable what ATC will say, so use that to your advantage!

Anticipate what your directives will be. This will help you listen and you will be more prepared with what you will respond with.

But don’t ever assume what ATC is going to say and start acting before they give you instructions. That’s how accidents happen.

4. Read Back All Pertinent Information When Communicating With ATC

Let ATC know that you understood what they told you and that you’re going to follow their directions. For example, your takeoff, landing, or taxi clearance.

As a brand new pilot this may feel a little funny but this is a fundamental park of effective ATC communication.

This is how ATC can confirm you heard them correctly and are going to comply with their exact instructions.

Remember, the controllers are monitoring and speaking to multiple aircraft so repeating their instructions is a fast and effective way to ensure you’re doing exactly what they want.

How to Talk to ATC: 6 Tips for Brand New Pilots - Thrust Flight (2)

5. Write Down Any Instructions ATC Gives You

Especially at larger and busier airports, you’ll want to write down everything you’re told.

Directions can get long and complicated at times, so the fewer transmissions it takes to get instructions to you, the better for ATC and for you.

6. No Conversations In The co*ckpit During Transmissions

There’s nothing worse than missing out on a transmission and not being sure if it was meant for you.

Pause all conversations in the co*ckpit when ATC is transmitting a message so that you are sure to not miss any transmissions intended for you.

For a more condensed version of this information, check out our youtube video below- 6 Tips for Communicating with ATC.

How to Practice Your ATC Communication

One of the best ways to become more confident in your ATC communication is to practice over and over again.

An easy option to get you started on learning how to talk to ATC is to listen in to LiveATC. If you’re training at a towered airport then listen to that airport.

While it may be interesting to listen to LAX tower, that’s not going to help you out much when you’re training at a much smaller, less busy airport. Listening to your home airport tower will help you get used to how they communicate.

Another great way to practice is with your instructor. They can take on the role of ATC and you can practice your various calls with them. It’s an effective method when you’re just starting out.

Are you a new pilot? Check out some of our other helpful articles covering everything from holding patterns and airline pilot schedules to how to choose a flight school and Envoy Airline Pilot Salaries.

  • About the Author
  • Latest Posts

Liz Brassaw

Liz Brassaw is a first officer for a regional airline and the former Chief Pilot and Chief Flight Operations Officer for Thrust Flight. She holds an ATP, CFI, CFII, MEI, AMEL, ASES with over 2,500 hours of flight instruction given. She earned her Bachelor of Science degree from the Utah Valley University School of Aviation Sciences. She’s passionate about flying and enjoys instilling that love in the instructors on her team and the new students she trains.

Become an Airline Pilot, Join the Zero Time to Airline Program

Land your dream job as an airline pilot in as little as 2 years. Get on the path to this incredible, high earning career today. Click the button below to learn more.

How to Talk to ATC: 6 Tips for Brand New Pilots - Thrust Flight (4)
Learn More
How to Talk to ATC: 6 Tips for Brand New Pilots - Thrust Flight (2024)
Top Articles
Latest Posts
Article information

Author: Geoffrey Lueilwitz

Last Updated:

Views: 5941

Rating: 5 / 5 (60 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Geoffrey Lueilwitz

Birthday: 1997-03-23

Address: 74183 Thomas Course, Port Micheal, OK 55446-1529

Phone: +13408645881558

Job: Global Representative

Hobby: Sailing, Vehicle restoration, Rowing, Ghost hunting, Scrapbooking, Rugby, Board sports

Introduction: My name is Geoffrey Lueilwitz, I am a zealous, encouraging, sparkling, enchanting, graceful, faithful, nice person who loves writing and wants to share my knowledge and understanding with you.